PowerPack 20K As An OTG to USB 2.0 Adapter for Android Phones?

Yes, it'll work. Please follow the steps below:

  • Connect your Android phone (Pixel / 2 / 3 | XL, Samsung Galaxy S9 / S8 / Note9 / Note8, etc.) to the USB-C port on the PowerPack 20k. 
  • Double-press the side button on the PowerPack 20k to start the USB 2.0 mode. The blue light next to the button will turn on.
  • Insert a USB flash drive or external hard drive into one of the two USB-A ports on the PowerPack 20k.
  • When you're done, eject your USB flash drive or external hard drive from the phone.
  • Unplug the USB cable.
  • Press the side button on the PowerPack 20k to exit the USB hub mode.
OTG adapter

← Older Post Newer Post →

Leave a comment

Please note, comments must be approved before they are published

FAQ

RSS

Why Is My iPhone Not Fast Charging?

Since the release of the iPhone 8, all newer iPhone models are capable of fast charging, which means you can get what Apple advertises as 50% charge in 30 minutes. This is a valuable feature for iP...

Forced Shutdown of the PurPods or PurPods Pro

A forced shutdown of the earbuds can be carried out as follows: 1) Put both earbuds back in the charging case. Leave the case lid OPEN. 2) Press and hold the button for 20 seconds (ignore the chang...